Hitachi ADVANCED COLOR PC-ARFH2E Manuel D'installation Et D'utilisation page 83

◆ Modules configuration
Module status:
Enable or disable the module.
Refrigerant cycle address:
Set the refrigerant cycle address for each module, making sure that the setting is common
with that of the outdoor (DSW4-RSW1) and indoor (DSW15 – RSW2) units which are part of
the module.
◆ Individual DHW
Individual DHW status:
Enable or disable the individual DHW for the selected module.
PMEN0597 rev.1 - 06/2023
Indoor unit address:
It must be always set to 0 (factory
default)
Individual DHW:
Configure the status and type of individual
DHW for the selected module (See
individual DHW for more information).
Individual DHW type:
• Select Main or Secondary depending on
the installation of the DHW system.
• When Secondary type is selected,
choose the Main module number.
1
74