Hitachi ADVANCED COLOR PC-ARFH2E Manuel D'installation Et D'utilisation page 65

1.17 Timer and schedule configuration

NOTE
Timer settings are only valid if the corresponding zone is in ON state at the time of execution of the
respective timer program.
The LCD controller must be set to the correct date and time before using the timer function.
Select the desired area to apply the timer function or delete all timers configuration:
Heating/Cooling (Air):
To set the timer to adjust the room temperature for Room 1/2.
Only when using room thermostats.
Is possible to launch a timer assistant.
1 / 2
Heating/Cooling (Water):
To set the timer to adjust the water working conditions
for Circuit 1/2.
PMEN0597 rev.1 - 06/2023
To set the timer to adjust the hot water
tank temperature.
1
56