Hitachi ADVANCED COLOR PC-ARFH2E Manuel D'installation Et D'utilisation page 78

1.18.1 Room thermostats configuration
Air Eco Offset for Circuit 1-2:
Configure the offset air temperature for the ECO
mode.
Current air temperature setting is reduced by
the indicated parameter (from 1 to 10°C)
Maximum / Minimum temperature for heating
and cooling:
Configure for Circuit 1/2:
• Heating maximum temperature
• Heating minimum temperature
• Cooling maximum temperature
• Cooling minimum temperature
Room Temperature Demand OFF:
Offset value between setting temperature and thermostat temperature to switch the
system to Demand OFF; this parameter refers to a positive difference in heating operation
and a negative difference in cooling operation.
PMEN0597 rev.1 - 06/2023
Thermostat configuration:
Configure the wired or wireless
room thermostats:
Thermostat 1: None, wired or
•
wireless
Wireless Binding ID for
•
Thermostat 1:
(1 or 2)
Thermostat 2: None, wired or
•
wireless
Wireless Binding ID for
•
Thermostat 2:
(1 or 2)
• Check RT Address: validation
procedure of the wireless
thermostats configuration
Compensation factors (See
Compensation factors section
below)
1
69