Hitachi ADVANCED COLOR PC-ARFH2E Manuel D'installation Et D'utilisation page 30

• Enable or disable the desired modules (module 1 is enabled by default)
• Select Next and press OK button.
• Enable or disable the individual DHW for each module.
• Select Next and press OK button.
• Configure thermostat (1 or 2): None, wired or wireless.
• Check RT address if wired is selected.
• Select Wireless binding ID (1 or 2) if wireless is selected.
• Configure Fan coils: Deactivated, cooling, heating or heat & cool if wired is selected.
• Select Wizard complete and press OK button.
PMEN0597 rev.1 - 06/2023



1
21