Hitachi ADVANCED COLOR PC-ARFH2E Manuel D'installation Et D'utilisation page 45

1.8 Home view
Water pressure
Room air temperature
External ambient
temperature
Home view shows on the middle the date and time
On the left side it shows:
• Inside temperature (home icon):
✓ If LCD works as Room 1, it took it from the controller sensor or auxiliary sensor
✓ If LCD works as Room 2, it took it from the controller sensor or auxiliary sensor
✓ If LCD works as Room 1+2, it took it from the controller sensor or auxiliary sensor, or the
average of the ones used per each zones.
✓ If LCD is water but not room, it will took them from the configured Rooms, if no one is
configued, that temperature will not be displayed.
✓ If LCD works as main LCD or water control but not room, it will took them from the
configured Rooms, if no one is configured, that temperature will not be displayed.
• Outside temperature (thermometer icon).
• Water pressure indicator is shown when LCD is Unit or Unit + Room (Not available for YUTAKI M
units)

NOTE
Room temperatures are not shown if LCD is only "Unit" and there are no thermostats configured.
PMEN0597 rev.1 - 06/2023
Hour
Date
1
36