Hitachi ADVANCED COLOR PC-ARFH2E Manuel D'installation Et D'utilisation page 23

• Press OK button.

• Select No when the device acts as Room Thermostat only. It does not control the unit.
• Press OK button.

1
• Select No when the device is not used as a room thermostat.
• Select Yes, in zone 1/ Yes, in zone 2 / Yes, in both zones, depending on the number of circuits
controlled.
• When select Yes, in both zones, jump to screen 8.
• Press OK button.

• Select the number of circuits (1 or 2).
PMEN0597 rev.1 - 06/2023 14