Hitachi ADVANCED COLOR PC-ARFH2E Manuel D'installation Et D'utilisation page 56

◆ Water generation
Considerations:
• When operation status is COOL ON, inlet pipe is orange, outdoor pipe is blue.
• When operaion status is HEAT ON, SWP ON or DHW ON, inlet pipe is blue, outdoor pipe is
orange, otherwise pipe is in gray.
• Two value is TwoHP when using a YUTAKI S Combi or YUTAKI S, otherwise it is normal T
• Pump 1 icon is shown when it is operating.
• Heater indication is shown always except:
✓ Cooling Operation
✓ Heater is disabled by DSW
✓ For YUTAKI M complementary heater variable does not include Heater (HP Only or HP+Boiler)
• If maximum heater step is deactivated, the deactivated steps are shown as deactivated.
• Wate pressure is hidden for YUTAKI M or YUTAKI Mirror.
• Two:
✓ Two is MRTwo for YUTAKI H or H Combi
✓ Two is Two3 for YUTAKI M or YUTAKI Mirror.
• TwoHP:
✓ Hidden for YUTAKI M or YUTAKI Mirror.
• Twi is MRTwi for YUTAKI H Combi
PMEN0597 rev.1 - 06/2023
WO.
1
47