Publicité
Do not connect or disconnect any test equipment while the ignition is on or the engine
is running.
Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent
on a clean cloth to clean the outside of the equipment as necessary.
Do not drive the vehicle and operate the test equipment at the same time. Any
distraction may cause an accident.
Refer to the service manual for the vehicle being serviced and adhere to all diagnostic
procedures and precautions. Failure to do so may result in personal injury or damage
to the test equipment.
To avoid damaging the test equipment or generating false data, make sure the vehicle
battery is fully charged and the connection to the vehicle DLC is clean and secure.
Do not place the test equipment on the distributor of the vehicle. Strong
electro-magnetic interference can damage the equipment.
Please ensure that the distance between the device and the human body is at least
20cm, otherwise personal injury may be caused.
A1-2024.09
Publicité
