Publicité
Each parameter item displays the selected mode independently.
Analog Gauge Mode – displays the parameters in form of an analog meter
1)
graph.
Text Mode – this is the default mode that displays the parameters in texts and
2)
displays in list format.
NOTE
Reading of status parameters, such as a switch reading, which are mostly in
word form, such as ON, OFF, ACTIVE, and ABORT, can only be displayed in
Text Mode. Whereas reading of value parameters, such as a sensor reading,
can be displayed in text mode and other graph modes.
Waveform Graph Mode – displays the parameters in waveform graphs. When
3)
this mode is applied, you can use two fingers to zoom in or out.
Digital Gauge Mode – displays the parameters in form of a digital gauge
4)
graph.
2.
Functional Buttons
The operations of available functional buttons on Live Data screen are described
below:
Back – returns to previous screen or exits the function.
Record – starts recording the retrieved live data; the recorded data is then
stored as a video clip in the Data Manager application for future reviews.
Freeze frame – displays the retrieved data in freeze frame mode.
Previous Frame – moves to the previous frame in the freeze frame data.
1)
Next Frame – moves to the next frame in the freeze frame data.
2)
Clear Data – clears all previously retrieved parameter values at a selected
point.
To Top – moves a selected data item to the top of the list.
Graph Merge – tap this button to merge selected data graphs (for Waveform
Graph Mode only). This function is useful when making a comparisons
between parameters.
NOTE
This mode supports up to 4 "graphics merge" parameters.
To cancel Graph Merge mode, tap the
Show – tap this option to switch between the two options; one displays the selected
parameter items, the other displays all the available items.
Actuation Test
The "Actuation Test" function accesses vehicle specific subsystem tests and
performs component tests. The available test functions vary according to the
manufacturer, year and model, and the menu will only show the available test options.
When performing the actuation test, the tester inputs the command to the ECU to
drive the actuator. This test can monitor the operation of the actuator by reading the ECU
data of the engine. For example, by repeatedly switching the two working states of the
solenoid valve, relay and switch, it can determine whether the system or components are
working normally, and execute the command of the switch on the door or window.
Left / Right turn signals
Through the left / right turn signal action test item, you can control the left and right
turn signal flashing to test whether the turn signal works normally.
Window regulator front / rear left / right: down / up
○
×
button in the upper right corner.
16
Publicité
