Publicité
application.
To receive remote support from a partner
1.
Power on the tablet. Tap the Remote Desk application on the CR Eagle Job
Menu. The TeamViewer screen displays and the device ID is generated and
shown.
2.
Your partner must install the Remote Control software to his/her computer by
downloading the TeamViewer full version program online
(http://www.teamviewer.com ), and then start the software on his/her computer
at the same time, in order to provide support and take control of the Display
Tablet remotely.
3.
Provide your ID to the partner, and wait for him/her to send you a remote
control request.
4.
A popup will display to ask for your confirmation to allow remote control on
your device.
5.
Tap Allow to accept, or tap Deny to reject.
Refer to the associated TeamViewer documents for additional information.
15 Quick Link
The Quick Link application provides access to iCarsoft's official website and to other
popular automotive service websites. These sites are invaluable resources of automotive
information and repair data and include forums, video training and expert consultation.
16 About
The About screen lists the CR Eagle's version, hardware, and serial number, storage
and etc..
17 User Data
The User Data application is used to store and view saved files. Contains images,
play back, user manual, Training, Report, DLC Location. Details are explained in the
following sections.
17.1 Image Files
The Image section contains all captured screenshot images. The image section
allows you to view all the screenshots.
17.2 Play Back
The playback section allows you to view diagnostic data, live data, and fault codes
on the system.
To view live data:
1. Tap the Play back icon on the User Data application. The screen display the
data list of diagnostic data, live data, and fault codes.
2. Select a list, the screen will enter the data flow recording interface.
3. Select the check box in the lower right corner of each list, tap the button in the
upper right corner to execute PDF output function or delete.
Perform PDF output function：
1） Select one or more data lists and tap the button "Output PDF " to enter the
interface. In this interface, you can still move up, down, and delete.
2） After the adjustment is completed, tap the button "Output PDF " in the
upper right corner, and an interface for outputting the report to PDF
appears. Fill in the file name, vehicle, customer, and operator, and press
the save button.
3） After the save is complete, the screen will show a message indicating that
28
Publicité
