Publicité
NOTE
Different models will have different menu modes. This manual is for reference. Everything
in kind shall prevail. If there is any increase or decrease in the function of the product, the
actual product shall prevail.
6 TPMS Program
CR Eagle can be used with wireless tire pressure module feature to perform TPMS
activation, programming and learning.
1. Original Sensor Information: This function displays the tire pressure sensor
model information configured by the vehicle manufacturer, including supplier, frequency,
part number, etc.
2. Activate Programmed Sensors: This function activates the programmed tire
pressure sensors and displays related parameters such as ID, pressure, temperature,
and battery status.
3. Check TS-Sensor: This function is used to check the iCarsoft sensor status and
display related parameters like ID, frequency, software version, and battery status.
4. Programming TS-Sensor: This function is used to program the iCarsoft sensor.
5. Automatic Relearn Guide: After replacing the tire pressure sensor, follow the
vehicle manufacturer's instructions to perform a simple road test self-learning process.
6. Diagnose By OBD: In specific situations, diagnostic functions may be required
when replacing tire pressure sensors.
7 Videoscope
A videoscope is a device utilized by automotive repair technicians to examine an
engine and its various components in order to aid in problem identification.
By employing an endoscope, technicians are able to visually inspect areas that are
difficult to access or not readily visible, such as engine blocks, valves, pistons, and
crankshafts etc.
This facilitates the process of identifying and rectifying faults.
The videoscope diagram is shown below.
1. Number ① is USB interface, connect USB with the product device.
2. Number ② is the viedoscope lens, view images through the lens.
To access the Videoscope:
1.
Tap the Videoscope application on the CR Eagle Main Menu. Go to the next
23
Publicité
