Publicité
To erase codes
1)
Select the [Clear fault code] on the "function menu"
2)
At this time, a warning message will appear on the screen, indicating that the
fault code and frozen data information will be cleared.
a)
Select [OK] to continue. After the operation is successful, an complete
information will be displayed on the screen.
b)
Select [Cancel] to exit.
3)
Re-enter the [Read fault code] function to retrieve the fault code to ensure the
successful code clearing operation.
View Data
When this function is selected, the screen displays the data list for the selected
module. The items available for any control module vary from one vehicle to another. The
parameters display in the order that they are transmitted by the ECM, so expect variation
between vehicles.
Select any module manually, and you will enter the specific data flow list. Gesture
scrolling allows you to quickly move through the data list. You can swipe the screen up or
down to find the data you want, or you can click the search box to directly search for the
data you want. The figure below shows a typical Live Data screen:
1.
Main Section
Name Column – displays the parameter names.
Check Box – tap the check box on the left side of the parameter name to
a)
make item selection. Tap the check box again to de-select the item.
Menu button – tap the menu button on the right to open a sub menu that
b)
provides various choices for data display mode.
Value Column – displays the values of the parameter items.
Unit Column – displays the unit for the parameters.
To change the unit mode, return to the "Settings" button and select the
desired mode.
Display Mode
There are four types of display modes available for data viewing, allowing you to
view various types of parameters in the most suitable way.
Tapping the menu button on the right to open a sub menu. There are four buttons to
configure the data display mode, and a Help button for access to additional
information.
15
Publicité
