Publicité
1.
From an active diagnostic screen, tap the Back or ESC functional button to
exit a diagnostic session step-by-step.
2.
From the Vehicle Menu screen, tap the Back button on the top toolbar; or tap
the Back button on the navigation bar at the bottom of the screen.
3.
Or tap the Home button on the diagnostics toolbar to exit the application
directly and return to the CR Eagle Job Menu.
Once the Diagnostics application is no longer communicating with the vehicle, it is
safe to open other CR Eagle applications, or exit the CR Eagle Diagnostic System and
return to the Android System's Home screen.
5 Service Operations
The Service section is specially designed to provide you with quick access to the
vehicle systems for various scheduled service and maintenance performances. The
typical service operation screen is a series of menu driven executive commands. By
following the on-screen instructions to select appropriate execution options, enter correct
values or data, and perform necessary actions, the system will guide you through the
complete performance for various service operations.
The most commonly performed service functions include: Oil reset, EPB, ABS
Bleeding etc.
After entering each special function, the screen will display the Vehicle Manufacturer,
you need to make a step-by-step selection according to your test vehicle.
5.1 ABS Bleeding (BLD) Service
When the ABS contains air, or the ABS computer / ABS pump / brake master
cylinder / brake cylinder/ brake fluid is replaced, the ABS bleeding function must be
performed to bleed the brake system to restore ABS brake sensitivity.
5.2 Oil Reset (OIL) Service
This function allows you to perform reset for the Engine Oil Life system, which
calculates an optimal oil life change interval depending on the vehicle driving conditions
and climate. The Oil Life Reminder must be reset every time the oil is changed, so the
system can calculate when the next oil change is required. Different vehicles may have
different methods to do the oil maintenance, generally, oil change is required whenever oil
lamp is on and the recommended maintenance period is reached. The Oil Reset function
can reset the maintenance period and distance and turn off the lamp when you really
18
Publicité
