Publicité
Cause
Chain/guide
rail hot
Chainsaw
juddering,
vibrating or
not sawing
properly
GB
Anl_PE_EAS_7520_SPK7.indb 328
Anl_PE_EAS_7520_SPK7.indb 328
Fault
- No oil in the tank
- Oil tank cap breather
blocked
- Oil outlet blocked
- Blunt chain
- Chain tension too loose
- Blunt chain
- Worn chain
- Saw teeth pointing in
the wrong direction
- 328 -
Remedy
- Fill up with oil.
- Clean the oil tank cap.
- Clear the oil outlet
- Re-sharpen or replace
the chain.
- Adjust the chain tensi-
on.
- Re-sharpen or replace
the chain.
- Replace the chain.
- Reinstall the saw chain
with the teeth facing in
the correct direction.
14.06.2022 09:43:28
14.06.2022 09:43:28
Publicité
