Télécharger Imprimer la page

Pattfield Ergo Tools PE-EAS 7520 Mode D'emploi page 314

Masquer les pouces Voir aussi pour PE-EAS 7520:

Publicité

Handle under load
Vibration emission value front handle a
Vibration emission value rear handle a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated noise emission valu-
es were measured in accordance with a set of standardized criteria
and can be used to compare one power tool with another.
The stated vibration emission levels and stated noise emission valu-
es can also be used to make an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary from the level spe-
cifi ed during actual use, depending on the way in which the power
tool is used, especially the type of workpiece it is used for.
Limit the operating time!
All stages of the operating cycle must be considered (for example,
times in which the electric tools are switched off and times in which
GB
the tool is switched on but operates without load).
Keep the noise emissions and vibrations to a minimum.
Only use appliances which are in perfect working order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever necessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
Anl_PE_EAS_7520_SPK7.indb 314
Anl_PE_EAS_7520_SPK7.indb 314
= 1,811 m/s²
h.
= 1,756 m/s²
h.
2
- 314 -
14.06.2022 09:43:26
14.06.2022 09:43:26

Publicité

loading