Publicité
10. Cleaning, storage and ordering of spare parts
Carry out the cleaning and maintenance work before putting into sto-
rage.
10.1 Cleaning
•
Regularly clean the clamping mechanism by blowing it out with
compressed air or cleaning it with a brush. Do not use tools for
cleaning.
•
Keep the handles free of grease so that you can maintain a firm
grip.
•
Clean the equipment as required with a damp cloth and, if neces-
sary, mild washing up liquid.
Danger!
•
Always disconnect the mains plug before cleaning the chainsaw.
•
Never immerse the unit in water or other liquids in order to clean it.
10.2 Storage and transport
•
If you are not going to use the chainsaw for an extended period of
time, remove the chain oil from the tank. Briefly immerse the saw
chain and the cutter bar into an oil bath and then wrap them in oil
paper.
•
Store the equipment and its accessories out of children's reach in
a dark and dry place at above freezing temperature. The ideal sto-
rage temperature is between 5 und 30 °C.
•
Always hold the equipment with one hand on the main handle and
the other hand on the additional handle.
•
Do not carry the equipment by its motor housing.
•
Secure the equipment against slipping if you transport it in a ve-
hicle.
•
If possible, use the original packaging for transporting the equip-
ment.
•
Clean the electric pole-mounted pruner and carry out its mainte-
Anl_PE_EAS_7520_SPK7.indb 325
Anl_PE_EAS_7520_SPK7.indb 325
- 325 -
GB
14.06.2022 09:43:27
14.06.2022 09:43:27
Publicité
