Publicité
Filling the oil tank (Fig. 9):
Warning! Fill in the oil outdoors and do not smoke while fi lling.
•
Place the chainsaw on a flat surface.
•
Clean the area around the oil tank cover (Item 11) and then open
the oil tank cover.
•
Fill the tank (Item 20) with saw chain oil. In the process, make sure
that no dirt enters the tank, as this could cause the oil nozzle to
become blocked.
•
Close the oil tank cover (Item 11).
6. Operation
Please note that the statutory regulations governing noise abatement
may diff er from one location to another.
6.1 Using the shoulder strap
Warning! Always use the shoulder strap when working with the
equipment. Switch off the equipment before you take off the shoulder
strap (Otherwise there is a risk of injury.)
GB
1. Fig. 10: Hook the carabiner (T) into the strap holder (E).
2. Fig. 11: Place the shoulder strap (4) over your shoulder and adjust
the length of the strap so that the strap attachment is at waist le-
vel.
3. Fig. 12: The shoulder strap is equipped with a buckle. Fold the fas-
tener up in the direction of the arrow if you need to put the device
down quickly.
6.2 Setting the telescopic tube (Fig. 13)
1. Open (a) the telescopic tube lock (8).
2. Pull out the telescopic tube (9) until it reaches the required wor-
king height.
3. Close (b) the telescopic tube lock (8) again.
Anl_PE_EAS_7520_SPK7.indb 318
Anl_PE_EAS_7520_SPK7.indb 318
- 318 -
14.06.2022 09:43:27
14.06.2022 09:43:27
Publicité
