Publicité
9. If the cable is damaged or cut, disconnect the power plug from the
mains immediately.
10. Electric shock can cause fatal injury. When holding the pole-
mounted pruner, keep it well away from overhead power cables.
11. Direction of the chain movement and teeth
12. Maximum cutting length / chain speed
13. This equipment complies with Protection Class II (double-insula-
ted)
14. Guaranteed sound power level: 105 dB
General safety instructions for electric tools
The term "electric tool" used in the safety instructions refers to elec-
tric tools operated from the mains power supply (with a power cable)
and to battery operated electric tools (without a power cable).
1. Workplace safety
a) Keep your work area clean and well illuminated. Untidy or un-
lit work areas can result in accidents.
b) Do not operate the electric tool in an environment where
there is a risk of explosions and where there are infl amma-
ble liquids, gases or dust. Electric tools produce sparks which
could set the dust or vapours alight.
c) Keep the electric tool out of the reach of children and other
persons. If there is a distraction, you may lose control of the ap-
pliance.
2. Electrical safety
a) The connector plug from this electric tool must fi t into the
socket. The plug should never be altered in any way. Never
use adapter plugs together with earthed electric tools. Un-
altered plugs and correct sockets reduce the risk of an electric
shock.
Anl_PE_EAS_7520_SPK7.indb 301
Anl_PE_EAS_7520_SPK7.indb 301
- 301 -
GB
14.06.2022 09:43:25
14.06.2022 09:43:25
Publicité
