Replacing The Oven Burner Nozzle - Angelo Po 291FAGF Manuel D'utilisation Et D'installation

REPLACING THE TOP BURNER NOZZLE (Ø130 - 10 KW)
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panel (B).
4 - Unscrew the nozzle (D) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the control panel (B) and the knobs (A)
on completion of the operation.

REPLACING THE OVEN BURNER NOZZLE

To carry out this operation, proceed as fol-
lows.
1 - Turn off the gas supply tap.
2 - Remove the bottom plates (A) and the grid(B)
from the oven.
IT
GB
DE
3 - Remove the rack (C).
4 - Undo the screws and remove the guard (D).
FR
ES
English
C
A C B
B
A
C
D
- 28 -
D
8
IDM-39617002400.tif
IDM-39617003100.tif
IDM-39617002700.tif