Miele PWM 509 Mode D'emploi page 134

en - Programme summary
Helmets*
Fabric
Programme se-
quence
Extras
* The safety helmet manufacturer must allow the helmet to be washed or dried by machine.
Before loading the machine, push the sliding visor, if applicable, into the safety helmet.
Place one helmet in each of the padded protective bags provided and close them.
The protective bags are available to order from the Miele Customer Service Department.
Remove easily removable attachments from the helmet and wash in a separate washing
net.
Gloves
Fabric
Programme se-
quence
Extras
After washing, air-dry the gloves with and without leather trim. Before drying, roll the
leather gloves or gloves with leather trim through your hands to maintain the elasticity of
the leather.
Belts*
Fabric
Programme se-
quence
Extras
* The belt manufacturer must allow the belt to be washed by machine.
If there are aluminium attachments on the belts, we recommend using a liquid delicates detergent with reduced pH value
which is particularly effective for dissolving pigmentation stains.
Place 2–3 belts (safety belts) in each of the padded protective bags provided and close
them.
The protective bags are available to order from the Miele Customer Service Department.
After washing, air-dry the belts. Before drying, roll the leather components through your
hands and, if necessary, treat them with a suitable leather refatting agent to maintain the
elasticity of the leather.
134
60 °C (Cold to 60 °C)
Firefighter helmets
Pre-wash up to 40 °C
Main wash up to 60 °C, wash time 16 min
3 rinse cycles, drainage
Soak, Rinse plus
40 °C (Cold to 40 °C)
Gloves with and without leather trim
Pre-wash up to 35 °C, main wash up to 40 °C, wash
time 9 min
3 rinse cycles
(3rd rinse cycle with option of leather care, 35 °C)
Final spin
Soak, Water plus, Rinse plus
40 °C (Cold to 40 °C)
Fire brigade belts also with aluminium components
and leather trim
Main wash up to 40 °C, wash time 8 min
3 rinse cycles
Final spin
Pre-wash, Rinse plus
Load ratio/load size
PWM 509 –
2 helmets
PWM 511 –
2 helmets
Load ratio/load size
PWM 509 –
17 pairs of
gloves
PWM 511 –
20 pairs of
gloves
Load ratio/load size
PWM 509 – 6 belts
PWM 511 – 7 belts