Miele PWM 509 Mode D'emploi page 128

en - Programme summary
Cloths therm. disinfection
Fabric
Programme se-
quence
Extras
Cloths therm. disinf + rtu
Fabric
Programme se-
quence
Extras
Cloths ch-th disinf 10 min
Fabric
Programme se-
quence
Extras
If "Pre-wash" is selected, place the detergent directly in the drum. If necessary, the 
and  compartments can be used to add detergent in the main wash cycle.
128
90 °C
Cotton, viscose, polyester and microfibre cleaning
cloths
Pre-rinse
Pre-wash up to 30 °C
Disinfection 90 °C, holding time 10 min
Cool down and/or disinfection rinse can be activated
in the Benchmark tool
3 rinsing baths
Final spin
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
90 °C
Cotton, viscose, polyester and microfibre cleaning
cloths
Same programme sequence as Cloths thermal disin-
fection
then set the residual moisture via the extra " – "
(moist, damp, wet, dripping wet)
The pre-set residual moisture is 2 drops (damp)
Pre-wash, Soak, Intensive, Rinse plus, Fill stop, Rinse
hold
70 °C
Cotton, viscose, polyester and microfibre cleaning
cloths
Pre-rinse
Pre-wash up to 30 °C
Disinfection 70 °C, holding time 10 min
3 rinsing baths (optional disinfection rinse can be ac-
tivated)
Final spin
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
Load ratio/load size
1:18
PWM 509 – 4.6 kg
PWM 511 – 5.6 kg
For number,
see
"Cloths load size"
chart