Miele PWM 509 Mode D'emploi page 119

Ch-th. disin. gentle 20 min
Fabric
Programme se-
quence
Extras
Incontinence
Fabric
Programme se-
quence
Extras
Incontinence laundry
Fabric
Programme se-
quence
Extras
* The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time and dispensing
quantities) must be set on site to suit detergents and disinfectants.
If "Pre-wash" is selected, place the detergent directly in the drum. If necessary, the 
and  compartments can be used to add detergent in the main wash cycle.
40 °C
Cotton, mixed fibre, curtains
Disinfection 40 °C*, holding time 20 min
Wash rhythm "gentle"
3 rinse cycles (optional disinfection rinse can be activ-
ated)
Final spin
Pre-wash, Soak, Intensive, Rinse plus, Fill stop, Rinse
hold
90 °C
Washable incontinence nappy systems
Pre-rinse bath
Pre-wash up to 40 °C
Disinfection 90 °C, holding time 10 min
Cool down and/or disinfection rinse can be activated
in the Miele Benchmark Programming Tool
3 rinse cycles
Final spin
Pre-rinse, Soak, Intensive, Rinse plus, Fill stop, Rinse
hold
90 °C
Heavily soiled personal clothing, cotton
2 pre-rinse baths
Pre-wash up to 40 °C
Disinfection 90 °C, holding time 10 min
3 rinse cycles
Cool down and/or disinfection rinse can be activated
in the Miele Benchmark Programming Tool
Final spin
Soak, Intensive, Rinse plus, Fill stop, Rinse hold
en - Programme summary
Load ratio/load size
PWM 509 – 8 kg
PWM 511 – 10 kg
PWM 509 – 6.2 kg
PWM 511 – 7.8 kg
1:10
1:13
119