DAB Esybox Serie Instructions Pour L'installation Et L'entretien page 78

flow every 23 hours. This happens whatever the device configuration (enabled or reserve). The exchange of priority requires that the device
that has been stopped for 23 hours be given maximum priority in the starting order. This means that as soon as it is necessary to supply
flow, it will be the first to start. The devices configured as reserve have precedence over the others. The algorithm ends its action when the
device has supplied at least one minute of flow. When the intervention of the anti-stagnation algorithm is over, if the device is configured as
reserve, it is returned to minimum priority to preserve it from wear.
14.3.11. Reserves and number of devices that participate in pumping
The multipump system reads how many elements are connected in communication and calls this number N. Then depending on the
parameters: number of active devices and NC, it decides how many and which devices must work at a certain time.
NC represents the maximum number of devices that can work at the same time.
If there are a number of active devices in a chain and NC simultaneous devices, with NC smaller than the number of active devices, it
means that at the most NC devices will start at the same time and that these devices will exchange with the number of active elements.
If a device is configured with reserve preference, it will be the last in the starting order, so for example if there are 3 devices and one of
these is configured as reserve, the reserve will be the third element to start, whereas if are set the number of active devices to 2, the
reserve will not start unless one of the two active ones develops a fault.
See also the explanation of the parameters
NC: Simultaneous devices;
IC: Configuration of the reserve.
14.3.12. Wireless control
The device can be connected to other devices by means of the proprietary wireless channel. There is therefore the possibility of
controlling particular operations of the system through signals received in remote mode: for example, depending on a tank level supplied
by a float it is possible to order it to be filled; with the signal arriving from a timer it is possible to vary the setpoint from SP to P1 to supply
irrigation.
These signals entering or leaving the system are managed by a control unit that can be bought separately from the DAB catalogue.
15. APP, CLOUD AND SOFTWARE UPDATE
Through the application H2D or through the service center, it is possible to update the software of the device to the latest version
available. For pumping group operation it is necessary that all firmware versions are the same, so in case you are creating a group with
one or more devices with different firmware versions, you will need to make an update to align all versions.
Requirements for APP H2D from Smartphone
Android ≥ 8.
•
IOS ≥ 12
•
Internet access
•
PC Requirements for Access to the Cloud Dashboard.
WEB browser that supports JavaScript (e.g. Microsoft
•
Edge, Firefox, Google Chrome, Safari).
Internet access
•
Firmware Update/Updates
Before you start using the device, make sure that the product is updated to the latest SW version available. Updates ensure better
usability of the services offered by the product.
To get the most out of the product, also consult the online manual and watch the how-to videos. All the necessary information is available
on the dabpumps.com website or on: Internetofpumps.com.
15.1. App download and installation
The product can be configured and monitored through a special APP DAB on the main stores, and H2D web portal.
If you have any doubts, access the internetofpumps.com website to be guided through the operation.
Download the H2D APP from the Google Play Store for Android devices or the App Store for Apple devices.
•
UOnce downloaded, the icon associated with the H2D APP will appear on your device's screen.
•
For optimal operation of the APP, accept the terms of use and all the permissions required to interact with the device itself.
•
In order for the initial setup and/or registration to the DAB cloud and controller installation to be successful, you must carefully read
•
and follow all instructions in the H2D APP.
ENGLISH
Internet Network Requirements for Access the Cloud
Active and permanent direct connection to the Internet
•
on site.
Modem/Router WiFi.
•
WiFi signal with good quality and strength in the area
•
where the device is installed.
If the WiFi signal is deteriorated, the use of a WiFi
Extender is suggested
The use of DHCP is recommended, although there
is the option to set a Static IP
72