DAB Esybox Serie Instructions Pour L'installation Et L'entretien page 53

8.2. Emptying the system
If you want to drain the water out of the system, proceed as follows:
1 Disconnect the power supply;
2 Turn on the delivery tap closes to the system so as to remove pressure from the system and empty it as much as possible;
3 If there is a check valve immediately downstream from the system (always recommended), close it so as not to let out the water
that is in the plant between the system and the first turned on tap;
4 Interrupt the suction pipe in the point closest to the system (it is always recommended to have a check valve immediately upstream
from the system) so as not to drain the whole suction system;
5 Remove the drainage cap and let out the water inside;
6 The water that is trapped in the delivery system downstream from the non-return valve integrated in the system can flow out at the
time of disconnecting the system, or on removing the cap of the second delivery (if not used).
Though essentially drained, the system is unable to expel all the water that it contains. During handling of the system after emptying it,
some small amounts of water may probably leak out from the system.
8.3. Modifications and spare parts
Any modification made without prior authorisation relieves the manufacturer of all responsibility. Only if there is an integrated power
cable, in the event of damage to the same, the repair must be carried out by specialized personnel to prevent any risk.
8.4. CE marking and minimum instructions for DNA
Consult the Product configurator (DNA) available on the DAB PUMPS website.
The platform allows you to search for products by hydraulic performance, model or article number. Technical data sheets, spare parts,
user manuals and other technical documentation can be obtained.
https://dna.dabpumps.com/
9. DECLARATION OF CONFORMITY
For the product indicated in chapter 3.1, we declare that the device described in this instruction manual and marketed by us complies
with the relevant EU health and safety regulations.
A detailed and updated declaration of conformity is available with the product.
If the product is modified in any way without our consent, this statement will become invalid.
10. GUARANTEE
DAB undertakes to ensure that its Products comply with what has been agreed and are free from original defects and faults connected
with their design and/or manufacture that make them unsuitable for the use for which they are normally intended.
For more details on the Legal Guarantee, please read the DAB Guarantee Conditions published on the website
https://www.dabpumps.com/en or request a printed copy by writing to the addresses published in the "contact" section.
ENGLISH
The image is for representative purposes only
47