Publicité
Left chinstrap cover (D-ring side)
Couvercle gauche de la jugulaire
(côté anneau en forme de D)
Linke Kinnriemenabdeckung (D-Ring-Seite)
14
MX-V
Right chinstrap cover (long side)
Couvercle droit de la jugulaire (côté long)
Rechte Kinnriemenabdeckung
(lange Seite)
English
WaRnInG:
Never use petrol, thinner, benzene or any other solvents. Even mild and seemingly
harmless chemicals can cause damage over a short period of time.
To replace the lining, align all four bosses over their plastic receptacles and push
them home until you hear and feel a positive "snap".
WaRnInG:
When reinstalling the comfort lining, be sure the lining is properly positioned
along the inside shape of the EPS (a.k.a. Styrofoam) liner. If the comfort
lining is not properly installed, the frame of the comfort lining may fold
when you put on and take off the helmet, which may injure your skin, etc.
Whenever you feel something is wrong with the comfort lining, check that
the lining is properly installed.
tO ReMOVe/RePlaCe ChInstRaP COVeRs
To remove the chinstrap covers, first remove the cheekpads as per previous
instructions. Unsnap the plastic chinstrap anchor cover from the steel chinstrap
anchor and slide the cover off the chinstrap. Note the right and left, inside and
outside of the chinstrap covers for replacement.
To wash the chinstrap covers, put them into lukewarm water with small amount
of laundry soap or your own shampoo and wash gently by hand. Rinse well with
fresh water and wipe off with a soft cloth. Dry them in the shade at ambient
temperature. Do not machine wash or dry.
WaRnInG:
Never use petrol, thinner, benzene or any other solvents. Even mild and seemingly
harmless chemicals can cause damage over a short period of time.
Publicité
Chapitres
