Publicité
Note:
With a new saw chain, the tensioning force decreases af-
ter some time. Therefore, you must retension the saw
chain after the first 5 cuts, or after 10 minutes of sawing at
the latest.
12.5
Sharpening the saw chain (7)
WARNING
Increased risk of accidents due to an incor-
rectly sharpened saw chain!
Deviations from the dimensions of the cutting edge ge-
ometry during sharpening increase the risk of kickback
of the product.
–
Have the saw chain sharpened by a professional.
12.5.1
Instructions for sharpening the chainsaw
File diameter
Saw chain type
21PBX
approx. 4.8 mm
13 Storage and transport
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature is between 5°C and
30˚C.
Store the product in its original packaging.
Cover the product to protect it from dust or moisture.
Store the operating manual with the product.
Top angle
Clamping rotation
angle
30°
Depth stop
www.scheppach.com
The saw chain can be resharpened at an authorised spe-
cialist workshop. Do not attempt to sharpen the saw chain
yourself if you do not have a suitable tool and the neces-
sary experience.
CAUTION
Special tools are required to sharpen the chain; these
ensure that the cutting tools are sharpened at the cor-
rect angle and to the correct depth.
All cutting links must have the same width and length
after sharpening.
Notes:
A sharp saw chain ensures optimum cutting performance.
It effortlessly eats through the wood, leaving behind large,
long wood chips.
A saw chain is blunt if you have to push the cutting equip-
ment through the wood and the wood chips are very
small. With a very blunt saw chain, no chips are produced
at all, only wood dust.
Bottom angle
Top tilt angle (55°)
Clamping tilt angle
Side angle
10°
13.1
Preparation for storage
1. Attach the chain guide.
2. For transport or when storing the product, cover the
blade with the blade guard.
3. Remove the battery.
4. Empty the product completely.
5. Clean and check the product for damage.
Standard depth
gauge
85°
0.64 mm
File
GB | 37
Publicité
