Publicité
g) Use electric tools, insertion tools, etc. according
to these instructions. Take into account the work-
ing conditions and the work to be performed. Use
of the power tool for operations different from those in-
tended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Battery tool use and care
a) Only charge the batteries with battery chargers
recommended by the manufacturer. A battery char-
ger that is suitable for a particular type of battery pos-
es a fire hazard when used with other batteries.
b) Only use the batteries in power tools that are de-
signed for them. The use of other batteries can lead
to injuries and a risk of fire.
c) Keep the unused battery away from paper clips,
coins, keys, nails, screws or other small metal ob-
jects that could cause a short-circuit between the
contacts. A short-circuit between the contacts of the
battery could result in burns or fires.
d) Liquid may leak from the battery if used incorrect-
ly. Avoid contact with it. In case of accidental con-
tact, rinse with water. If the liquid gets into your
eyes, seek additional medical attention. Leaking
battery fluid may cause skin irritation or burns.
e) Do not use a damaged or modified battery. Dam-
aged or modified batteries can behave unpredictably
and cause fire, explosion or injury.
f) Do not expose a battery to fire or excessive tem-
peratures. Fire or temperatures above 130°C may
cause an explosion.
g) Follow all charging instructions and never charge
the battery or rechargeable tool outside the tem-
perature range specified in the operating manual.
Incorrect charging or charging outside the approved
temperature range can destroy the battery and in-
crease the risk of fire.
6) Service
a) Only have your power tool repaired by qualified
specialists and only with original spare parts. This
will ensure that the safety of the power tool is main-
tained.
b) Never attempt to service damaged batteries. Any
type of battery maintenance shall be carried out only
by the manufacturer or an authorised customer ser-
vice centre.
General chainsaw safety warnings
a) Keep all body parts away from the saw chain
when the saw is running. Before starting the prun-
ing saw, ensure that the saw chain is not touching
anything. When working with a chainsaw, a moment
of carelessness can result in clothing or body parts
being caught by the saw chain.
b) Always hold the chainsaw with your right hand on
the rear handle and your left hand on the front
handle. Holding the chainsaw using the opposite grip
increases the risk of injuries and shall be avoided at
all times.
c) Only hold the chainsaw by the insulated gripping
surfaces, as the saw chain could hit hidden power
lines or its own mains cable. Contact between the
saw chain and a live power line can also electrify met-
al device parts and lead to an electric shock.
d) Wear eye protection. Further protective equipment
for hearing, head, hands, legs and feet is recom-
mended. Suitable protective clothing reduces the risk
of injury from flying chips and accidental contact with
the saw chain.
e) Do not work with the chainsaw in a tree, on a lad-
der, or from a roof or an unstable standing sur-
face. There is a serious risk of injury if operated in
such a manner.
f) Always make sure you have a firm footing and on-
ly use the chainsaw when standing on firm, safe
and level ground. Slippery ground or unstable stand-
ing surfaces can cause loss of balance or loss of con-
trol of the chainsaw.
g) When cutting a branch that is under tension, ex-
pect it to spring back. If the tension in the wood fi-
bres is released, the tensioned branch can hit the op-
erator and/or wrest the chainsaw from control.
h) Be especially careful when cutting undergrowth
and young trees. The thin material can get caught in
the saw chain and hit you or throw you off balance.
i)
Carry the chainsaw by the front handle when
switched off, with the saw chain facing away from
your body. Always put the protective cover on
when transporting or storing the chainsaw. Careful
handling of the chainsaw reduces the likelihood of ac-
cidental contact with the running saw chain.
j)
Follow the instructions for lubrication, chain ten-
sioning and replacing the guide bar and chain. An
improperly tensioned or lubricated chain can break or
increase the risk of kick-back.
k) Only saw wood. Do not use the chainsaw for work
for which it is not intended. Example: Do not use
the electric chainsaw to saw metal, plastic, brick-
work or building materials other than wood. Using
the chainsaw for unintended work can cause danger-
ous situations.
l)
Do not attempt to fell a tree until you have a clear
understanding of the risks and how to avoid them.
The user or other persons can be seriously injured by
a falling tree.
m) Follow all instructions when clearing debris, stor-
ing or servicing the chainsaw. Make sure the
switch is off and the battery is removed. Unexpect-
ed operation of the chainsaw saw while clearing a
buildup of material or during maintenance can cause
serious injury
Causes and avoidance of kickback
Kickback can arise if the tip of the guide rail touches an
object or if the wood bends and the saw chain jams in the
cut.
Touching with the rail tip can sometimes lead to an unex-
pected backward reaction, whereby the guide rail whips
up and in the direction of the user.
If the saw chain jams on the top edge of the guide rail, the
rail can jerk back in the direction of the user suddenly.
www.scheppach.com
GB | 27
Publicité
