Publicité
Hazards caused by accessories
■
Disconnect the machine from the energy supply before changing
the machine tool or accessory .
■
Do not touch fittings or accessories during the striking process be-
cause this can increase the risk of cuts, burns or injuries caused by
vibrations .
■
Use only accessories and supplies of the sizes and types recom-
mended by the manufacturer of machines for screw connections;
do not use any other types or sizes of accessories or consumable
materials .
■
Use only impact fittings that are in good working order because
any defects in the handles and accessories can cause these to
break and be ejected when used with impact wrenches .
Hazards in the workplace
■
Slipping, tripping up and falling are the main causes of injuries in
the workplace . Pay attention to surfaces that may have become
slippery from the use of the machine and also be aware of trip-
ping hazards caused by air or hydraulic hoses .
■
Proceed with caution in unknown surroundings . Hidden hazards
caused by power or other supply lines may be present .
■
This compressed air tool is not suitable for use in explosive atmo-
spheres and is not insulated against contact with power sources .
■
Ensure that there are no electric cables, gas pipes, etc . that might
result in a hazard if damaged by using the machine .
■
50
│
GB │ IE
PDRS 6.3 B2
Publicité
