Publicité
■
If universal rotary joints (claw couplings) are used, locking pins
must be inserted and Whipcheck hose restraints must be used to
provide protection in the case of a failure of the connection be-
tween the hose and the machine .
■
Ensure that the maximum permissible pressure on the machine is
not exceeded .
■
For torque-controlled machines with continuous rotation, the air
pressure has effects on performance that are relevant in terms of
safety .
Requirements for the length and diameter of the hose must there-
fore be defined .
■
Never carry pneumatic machines by the hose .
Additional safety notices
■
If applicable, observe special work safety or accident prevention
regulations for the handling of compressors and compressed air
tools .
■
Ensure that the maximum permissible working pressure specified
in the Technical Data is not exceeded .
■
Do not overload this tool – use this tool only within the capacity
range specified in the Technical Data .
■
Use safe lubricants . Ensure sufficient ventilation at the place of
work . In case of increased discharge:
check the compressed air tool and have it repaired if necessary .
■
Do not use this tool if you are distracted . Be alert, watch what
you are doing and use common sense when operating a com-
pressed air tool . Do not use tools when you feel tired or are
under influence of drugs, alcohol, or medication . A moment of
inattention when operating the tool can result in serious personal
injuries .
■
54
│
GB │ IE
PDRS 6.3 B2
Publicité
