Publicité
Operation
Compressed air ratchet
♦
Fit the required plug-in attachment
sion piece
♦
Set the correct rotational direction on the turn bolt
R = anticlockwise
F = clockwise
♦
Fit the plug-in attachment onto the screw head .
NOTE
►
The connection with the compressed air source is made using a
flexible compressed air hose with a quick coupler .
You will reach the best performance of your ratchet wrench
with a compressed air hose (LW) with inside diameter 10 mm .
Switching on and off
Switching on:
♦
Press the trigger
Switching off:
♦
Release the trigger
♦
When you have finished working, disconnect the tool from the
compressed air source .
■
58
│
GB │ IE
onto the square retainer
to turn the appliance on .
.
,
,
+
or the exten-
.
PDRS 6.3 B2
:
Publicité
