Fault
No sound
No or poor radio
reception
CD is not played.
Possible cause
The current volume is set
too low.
The mute setting is
activated.
When the device is
connected via AUX/LINE
IN or Bluetooth: The
volume of the external
device is too low.
Headphones are
connected.
The sound playback
on the loudspeakers
is interrupted if
headphones are
connected.
The station signals are
too weak.
Condensation has
formed.
Incorrect CD format.
The CD is dirty or
incorrectly inserted.
Corrective action
Increase the volume.
Switch off the mute
setting.
Increase the volume on
the external device.
Unplug the headphone
jack plug from the
headphone socket.
Adjust the frequency of
the stations.
Move the radio to a
different location or
change the direction of
the aerial to improve the
reception, if necessary.
Pull the mains adapter
out of the socket and
wait until the device and
the CD have adapted
to the environmental
conditions.
The device only supports
the CD formats specified
in the technical data.
Clean the CD and
insert it into the CD
compartment with the
label facing upwards.
DE
FR
NL
ES
IT
EN
367