17.2. Storing radio stations
The FM radio has 40 memory slots.
Once a radio station has been saved, the station's memory slot is shown
on the display during playback.
Select a radio station that you want to save as a favourite.
Press and hold the
device until the list of memory slots is shown on the display.
Use the buttons on the remote control orthe VOL/+ dial on the device
to select a memory slot from 1 to 40. Confirm by pressing SELECT on the remote
control or the VOL/+ button on the device. The radio station has been stored.
The first nine memory slots can also be saved directly by pressing and
holding one of the number buttons 1–9 on the remote control without
having to hold down the
To call up the radio station again, press the
button on the device and select the station from the list. Press SELECTon
the
the remote control or VOL/+ on the device to play the radio station.
The first nine saved radio stations can be called up directly by briefly
pressing the number buttons 1–9 on the remote control.
17.3. Main menu in FM radio mode
Press the
button on the device or the
call up the menu for FM radio mode.
17.3.1. Search settings
Under SCAN SETTING, confirm the prompt STRONG
STATIONS ONLY? with YES for the radio to search only for stations with a strong
signal.
NO for the radio to also search for stations with a weak signal.
•
17.3.2. Audio setting
Under AUDIO SETTING, confirm the prompt LISTEN IN MONO
ONLY? with
•
YES to play radio stations in mono. Use this setting when there is weak
reception.
•
NO to play radio stations in stereo.
17.3.3. Automatic station search
Under AUTOMATIC STATION SEARCH, confirm the prompt AUTOMATIC
STATION SEARCH with
350
button on the remote control or the
button beforehand.
button on the
button on the remote control or
button on the remote control to