Medion P66400 Notice D'utilisation page 339

16.3.5. Dynamic Range Control
Dynamic Range Control (DRC) is helpful during quiet parts of a radio programme
and in noisy environments. The station sets the DRC level of the radio transmission.
Using the Dynamic Range Control function you can set the optimum level for you.
• DRC off: DRC is switched off. The DRC level of the radio transmission is not used.
• DRC low: the DRC level is set to half of the transmitted level.
• DRC high: the total DRC level is set.
16.3.6. Station sort sequence
 Set the station sort sequence for the list under STATION ORDER:
ALPHANUMERIC
•
Stations are sorted in alphabetical and numerical order.
• ENSEMBLE
Stations are sorted by DAB ensemble.
17. Listening to FM radio
You can play analogue radio stations using the FM operating mode. A good
reception via the integrated telescopic aerial is required for this. Align the aerial
manually to obtain the best-possible reception.
 To listen to FM radio, select FM in the main menu and then press SELECT on the
remote control to confirm or press the
and press the SELECT button to confirm.
The following information is shown on the display:
• Station name/(in case of RDS reception)/frequency display
• Time
• FM signal strength
• FM stereo reception
• RDS reception
Pressing the INFO button on the remote control or the INFO button on the device
several times brings up additional information:
• Genre
• Frequency
• Current date
• PTY information
• Radio text
17.1. Setting radio stations
 Press the  or  button on the device or remote control several times to set the
radio frequency.
 Press and hold the  or  button on the device or remote control to start
an automatic station search. The automatic search starts either backwards or
forwards, depending on which button was pressed.
button and use the dial to select FM
DE
FR
NL
ES
IT
EN
349