Medion P66400 Notice D'utilisation page 349

24. Playback on the LINE IN connection
There is an LINE-IN audio input on the back of the device.
 Connect the LINEIN socket to the audio output of an external device using a
stereo cinch audio cable to output the audio signal on the internet radio.
 Then select the LINE IN menu. You can also press the
control and then use the arrow buttons to select the operating mode and
confirm by pressing SELECT.
 The audio signals from the external device are now output on the internet radio
speakers.
25. Setting the switch-off time
 Select the following automatic switch-off settings under SLEEP in the system
settings:
SLEEP MODE OFF  15 MINUTES  30 MINUTES  45 MINUTES 
60 MINUTES
When SLEEP MODE OFF is selected, no switch-off time is set.
You can also set the switch-off time by pressing the SLEEP button on the remote
control several times. The remaining time is shown on the display together with a
moon symbol.
26. Setting the alarm
You can set two alarm times on your internet radio under ALARMS in the system
settings.
Before setting an alarm time, you must first check the time setting.
 Select an alarm and press SELECT to confirm.
 Select one of the entries and press SELECT to apply the settings.
26.1. Switching the alarm on/off
 Under ENABLED, select OFF to deactivate the alarm.
 Select DAILY, ONCE, WEEKENDS or WEEKDAYS to activate the alarm.
26.2. Setting the alarm time
 Set the time that the alarm is to go off under TIME.
The digit position for the hour flashes.
 Set the hour using  and press SELECT to confirm.
The digit position for the minutes flashes.
 Set the minutes using  and press SELECT to confirm.
button on the remote
DE
FR
NL
ES
IT
EN
359