7.1. Inserting batteries in the remote control
Remove the battery compartment cover on the back of the remote control.
Insert two LR03/AAA/1.5 V batteries in the battery compartment of the remote
control. Check the battery polarity (as shown on the bottom of the battery
compartment).
Close the battery compartment.
WARNING!
Risk of explosion!
There is a risk of explosion if the battery is replaced
incorrectly.
Replace batteries only with the same or equivalent
type.
The remote control can be damaged by leaking batteries if not used for a long
period of time!
Remove the batteries from the remote control if the device is not going to be
used for a long period.
338