Sos Functions Hs; Programming The Sos Number; If The Telephone Is Not Working; General - HumanTechnik freeTELeco Mode D'emploi

SOS functions HS

This part of the manual refers to the SOS
function in the handset.
function. By pressing the "SOS" key at the
back, a freely programmable number is
called. Only one number can be saved.

Programming the SOS number

Press the "SOS" key at the back. If you have
not yet saved any number, you will now be
number and press "Save".
nebook under "SOS". You can also edit the
number there.
42 English
If the telephone is not wor-
king

General

Ensure that the telephone cable is undama-
ged and plugged in correctly. Remove any
extension cords and other phones. If the te-
lephone then works, the fault was caused by
another device.
Try to connect the telephone at a neighbour's
house, for example. If the telephone works
there, your telephone line is probably faulty.

The telephone is not working

-
Ensure that the power adapter is correctly
plugged into the telephone and the so-
cket.
Ensure that the telephone cable is cor-
rectly plugged into the telephone and the
telephone socket.
lephone connection. If this telephone
works, your telephone is probably faulty.
Only use the original cable or a telephone
cable with international assignment.

Warning signal during a call

The batteries are almost empty
- Place the handset in the charger.
The range of the telephone was excee-
ded
- Move the handset closer to the base
station.
-