Analogue Input Filter; Second Heat Recovery Module - Carel pRack pR300T Mode D'emploi

2.8 Analogue input filter

2.9 Second heat recovery module

Screens Eeab15 to Eeab21 can be used to configure the second heat recovery module. The settings are
similar to those for the first module.
Screen Eeab13 can be used to specify whether to apply a
filter (average of the samples) to the probe used to calculate
the heat recovery demand THRnO.
On screen Eeab33, it can be specified whether to apply a
filter (sample average) to the external 0-10V signal used to
calculate the heat recovery request.
15
ENG
cod. +030220595 - 1.2 - 13.08.2020