Carel pRack pR300T Mode D'emploi page 52

ENG
Screen for configuring the analogue output associated with
the modulating pump.
If a flow switch is available for measuring water circulation,
this can be connected to the pRack and configured on screen
Eeaa10. If the pump is active and the flow switch measures
no flow, an alarm will be signalled..
Input associated with the gas cooler inlet temperature probe,
which can be used for monitoring purposes.
Digital output for implementation of the gas cooler bypass
function.
If the gas cooler is bypassed using a modulating valve, screen
Eeaa22 is used to assign the associated analogue output.
Screen for assigning the type and the position of the probe
used to measure the temperature downstream of the gas
cooler bypass. This probe is necessary if using the bypass.
26
cod. +030220595 - 1.2 - 13.08.2020