CAME BX704AGS Manuel D'installation page 59

Parameter reset
Restore factory settings except for the functions: [Radio decoding], [Motor type] and the settings related to travel calibration.
A4
Manoeuvre counter
View the number of operator manoeuvres.
A5
FW version
Display the firmware version.
H1
Import/export data
Save user data and system configuration data on a MEMORY ROLL card.
The stored data can be reused for another control board to configure another system in the same way.
Before inserting and removing the MEMORY ROLL card, DISCONNECT THE MAINS POWER SUPPLY TO THE LINE.
1
Insert the MEMORY ROLL card into the corresponding connector on the control board.
2
Press the "Enter" button to access programming.
3
Use the arrows to choose the desired function.
The functions are displayed only when a MEMORY ROLL card is inserted.
- Save data
Save user data, timings and configurations to the memory device (memory roll).
- Read data
Upload user data, timings and configurations to the memory device (memory roll).
Once the data have been saved and loaded, remove the MEMORY ROLL card.
OFF (Default)
ON (Run operation)
001 = 100 manoeuvres
010 = 1000 manoeuvres
100 = 10000 manoeuvres
999 = 99900 manoeuvres
CSI = Maintenance work
1 3 2