Technical Data / Accessories - ProMinent dulco flex DF2a Mode D'emploi

Sizes and weights
Electrical data
Protection class
Enclosure rating
(water and contact)
Temperature information
Noise intensity level
ProMinent ®
Sizes 126 x 136 x 105 mm (WxHxD)
PG 9 connectors clamping range: Ø 3.5 - Ø 8 mm, SW 19
Total weight (incl. assembly materials) approx. 750 g
Total weight (net) approx. 600 g
230 V ±10 % at 50/60 Hz
Power supply:
115 V ±10 % at 50/60 Hz
Power consumption: approx. 5 W
Operating time: 100 %
There is no short circuit protection and this must be provided
during installation.
Protection class 1 according to DIN EN 8033-1 (earth lead
connector required)
IP 65
Admissible ambient temperature:
Admissible storage temperature:
Admissible chemical temperature: -10...45 °C
< 30 dB (A)
at maximum back pressure (water) in accordance with DIN EN
12639
13 Accessories
®
- dulco flex assembly kit
- Mains lead
- Dosing valve and foot valve
- Suction lances

Technical data / Accessories

-10...45 °C
-10...55 °C
Order no.
1007297
(via identification code)
(via identification code)
(see Product Catalogue)
35