Publicité
Les langues disponibles
Les langues disponibles
Induction cooking system
When your induction hob is switched on and a cooking zone has been selected,
the electronic circuits produce induced currents that instantaneously heat the
bottom of the pan which then transfers this heat to the food. Cooking takes
place with hardly any energy loss between the induction hob and the food.
Your induction hob operates only if a correct pan with the right features is
placed on a cooking zone. Please refer to COOKWARE/COFFEE POT FOR
INDUCTION COOKING.
If the pan detection symbol
suitable and your induction hob will not operate After 10 minutes without
detecting any pan, the cooking zone switches Off automatically and can only
be switched On after the control knob has been returned into "0" (Off) setting.
Remaining heat indicators
When the temperature of a cooking zone is still hot, the relevant
heat indicator lights up on the display to alert you of the hot surface.
Avoid touching the hob surface over the cooking area. Please pay special
attention to children.
When the
is lit on the display, it is still possible to start cooking again;
just turn the control knob to the required power level.
Cookware/coffee pot for induction cooking
The induction cooking system OPERATES ONLY if using correct cookware
suitable for induction cooking (normally identified by an induction symbol
on the bottom of the cookware/ coffee pot). The use of not suitable
cookware may cause damage to the appliance.
The bottom of the pan/coffee pot has to be ferromagnetic to generate
the electromagnetic field necessary for the heating process (meaning
a magnet has to stick to the bottom of the pan/coffee pot).
Pans/coffee pots made from the following materials are not suitable:
* glass, wood, porcelain, ceramic, stoneware;
* pure stainless steel, aluminium or copper without magnetic bottom.
To check if a pan/coffee pot is suitable or not:
* Test the bottom of the pan/coffee pot with a magnet: if the magnet sticks,
the pan is suitable.
* if a magnet is not available pour a small amount of water inside the pan/
coffee and place the pan on a cooking zone. Switch on the cooking zone:
if the symbol
(pan detection) appears on the cooking zone display
(instead of the power level), the pan/ coffee is not suitable.
appears on the display, your pan is not
217
remaining
Publicité
