Publicité
Les langues disponibles
Les langues disponibles
Backguard (Some models only)
Before installing the cooker, assemble
the backguard "C" (fig. 1.2).
* The backguard "C" can be found
packed at the rear of the cooker.
* Before assembling remove any
protective film/adhesive tape.
* Remove the two spacers "A" and
the screw "B" from the rear of the
cooktop.
* Assemble the backguard as shown
in figure 7.2 and fix it by screwing
the central screw "B" and the
spacers "A".
Fitting the adjustable feet
The adjustable feet must be fitted
to the base of the cooker before
use.
Rest the rear of the cooker an a
piece of the polystyrene packaging
exposing the base for the fitting of
the feet.
Levelling the cooker
The cooker may be levelled by
screwing the lower ends of the
feet IN or OUT (fig. 1.4).
207
C
B
A
Fig. 1.2
Fig. 1.3
Fig. 1.4
Publicité
