Publicité
Les langues disponibles
Les langues disponibles
2. Set the end of the cooking time
by pressing the
cooking time already added to the
clock time will appear), and the
button (fig. 5.6); if you pass the
desired time you may get back by
pushing the ➖ button.
After this setting, the
will disappear. If after this setting,
the AUTO flashes on the display
and a buzzer sounds, it means there was an error in the programming,
that is that the cooking cycle has been superimposed on the clock. In
this case, modify the end of cooking time or the cooking period itself by
following again the above mentioned instructions.
3. Set the temperature and the cooking program by using the switch and
thermostat knobs of the oven (see specific chapters).
Now the oven is programmed and everything will work automatically,
that is the oven will turn on at the right moment to end the cooking at the
established hour.
During cooking, the
By pushing the
button you can see the time that remains until the end
of cooking.
The cooking program may be cancelled at any time by pushing
At the end of the cooking time the oven will turn off automatically, the
symbol will turn off, AUTO will flash and a buzzer will be sound, which can
be turned off by pushing any of the buttons except the /➖ buttons.
Turn the switch and thermostat knobs to zero and put the programmer
onto "manual" by pressing the
Attention
After a power cut the clock resets to zero and cancels the set
programs. After a power cut, three zeros will flash on the display.
button (the
symbol
Fig. 5.6
symbol remains illuminated.
button.
242
.
Publicité
