Auriol 4-LD6162-1-2 Utilisation Et Avertissements De Sécurite page 19

Activate or deactivate the alarm
Your device has two separate alarms Alarm 1
and Alarm 2.
 Press the alarm button (28) once to activate
Alarm1.
(16) appears on the
The alarm symbol 1
display (1).
 Press the alarm button (28) again to activate
Alarm2. The alarm symbol 2
appears on the display (1).
 Press the alarm button (28) again to activate
both alarms.
The alarm symbols 1+2
on the display (1).
 Press the alarm button (28) again to activate
both alarms.
The alarm symbols (16) are extinguished.
If the alarm is not deactivated within 2
minutes, it switches off automatically and
sounds again after 24 hours.
Snooze function (SNOOZE)
 When the alarm sounds, press the
SNOOZE/LIGHT button (8) to
temporarily deactivate the alarm.
The respective SNOOZE symbol (17) SNZ 1
or SNZ 2 flashes in the display.
The alarm will sound again after approx. 5
minutes.
Switch off the alarm
 Press any button except the SNOOZE/LIGHT
button (8) to turn off the alarm.
The alarm will sound again after 24 hours.
Temperature
Select temperature unit
 In the normal time display, press the down
button (27) to display the temperature in
Celsius (°C) or Fahrenheit (°F).
Set temperature warning
You can set a temperature warning with an upper
and lower limit value. The device is preset to an
(16)
upper limit of 50 °C and a lower limit of -20 °C.
 Press and hold the temperature warning
button (30) for about 3 seconds. The upper
value
(16) appear
(-15 – 50 °C) will flash and can be adjusted
with the up button (26) and the down button
(27).
 Press the temperature warning button (30) to
confirm your entry. The lower value (-20 – 50
°C) will flash and can be adjusted with the up
button (26) and the down button (27).
 Press the temperature warning button (30) to
confirm your entry.
If the upper value is exceeded or the lower
value is undershot, the temperature warning
symbol (4) flashes and an alarm tone
sounds when the sensor channel is displayed.
Enable and disable the temperature
warning
 Press the temperature warning button (30) to
activate the temperature warning (4).
 Press the temperature warning button (30)
again to deactivate the temperature warning
(4).
Frost warning
If the outdoor sensor measures a temperature
below +1 °C – -1 °C, there is a risk of frost. The
- 17 -