Crosscall CORE-X5 Mode D'emploi page 62

Switching the phone on and off
Press and hold the phone's On/Off button and wait a few seconds until the display turns on�
When you switch on your phone for the first time or after performing a data reset, follow the
on-screen instructions to set up your device�
Once the phone is on, this button can also be used to:
• Lock/Unlock your touch screen with a single short press
• Access emergency calls, switch off or restart your phone with a long press�
Tips and precautions for charging your battery
1. Open the dust cap and connect the cable and AC adapter supplied in your
2. Plug the AC adapter into an electrical outlet�
3. When the battery is fully charged, unplug the phone from the charger�
Never charge your phone using the X-LINK
connection together, as this could shorten the lifespan of your phone's equipment�
The battery is built into the phone and is not removable� Do not remove the battery
yourself�
*Magconn Technology
pack using the USB-A port� Then plug the other end of the cable into the
USB-C port on your phone�
First unplug the charger from the device, then unplug it from the
electrical outlet�
magnetic connection and the USB
TM*
62