Crosscall CORE-X5 Mode D'emploi page 61

SETTING UP YOUR CORE-X5
Installing the nano SIM/micro SD card
1. Make sure that your device is turned off� If not, switch it off by pressing the On/Off button�
2. Eject the nano SIM/micro SD card tray using the tool provided, inserting it into the hole
designed for this purpose, as shown below�
3. Remove the tray completely�
4. You can insert 2 nano SIM cards and a micro-SD card into your phone�
a. To ensure optimal compatibility with operator services, insert your nano SIM card,
metal side down, in the smallest compartment (SIM 1)�
b. If required, you can insert a second nano SIM metal side down into the middle
compartment (SIM 2) and/or a micro SD card into the left compartment�
5. Slide the tray back into the phone�
a. Make sure the cards are properly aligned�
b. Check that the tray is properly aligned with the slot in the phone when you slide it
back in�
c. Insert the tray and push it in, as shown above�
Important: To guarantee that your smartphone is dust and waterproof, make sure that the tray
is fully inserted and locked�
SIM 2 SIM 1
sim 2 sim 1
61
SIM 1
sim 1
MICRO SD micro sd SIM 2 SIM 1
sim 2 sim 1