Dreame X40 Master Manuel D'utilisation page 33

Routine Maintenance
EN
Dust Box and Filter
1. Open the robot cover and press the dust box clip to remove the dust
box.
2. Open the dust box cover, remove the filter, and then empty the dust
box as shown in the diagram.
31
3. Gently tap the basket of the filter to remove the dirt.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects to
prevent damage.
4. Rinse the dust box and filter with water and dry them completely
before reinstalling.
Note:
·
Rinse the dust box and filter with clean water only. Do not use any detergent.
·
Use the dust box and filter only when they are completely dry.
24h