Dreame X40 Master Manuel D'utilisation page 32

Routine Maintenance
EN
Main Brush
1. Press the brush guard clips inwards to remove the brush guard and
lift the brush out of the robot.
2. Pull out the brush covers at both ends of the brush as shown in the
figure. Use the provided cleaning tool to remove any hair tangled in the
brush. Reinstall the brush covers on both ends of the brush, and then
reinstall the brush. Press on the brush guard to lock it in place.
30
Side Brush
Unscrew the side brush with a screwdriver, clean the hair from the
brush, and then screw it back on.
Mop Pad Holder
Remove and clean the mop pad holder.