Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
EN
③ Install the 3-way Diverter Valve
Note:
· Close the main water valve in your home before installation and make sure all
the water in the pipes has been drained.
· Check whether the sealing ring is in place before installation. If not, all the
butted male thread fittings need to be firmly wrapped with Teflon tape 6-9
turns in the direction of screwing to prevent leakage.
· It is recommended to install an angle valve at the water source before
installing the 3-way diverter valve.
· Use a monkey wrench to install if necessary.
· The following installation takes 3-Way Diverter Valve (G1/2) as an example, the
size of G3/8 is installed by the same method.
Completed Installation
Option 1
-With Male Thread Fitting
17
Option 2
-With Female Thread Fitting
Option 1- Water Source with Male Thread Fitting
Angle Valve/
Water Source
(not supplied)
3-Way Diverter Valve
Clean Water Pipe
Adapter
(purchase separately
if necessary)
Publicité
