Publicité
Les langues disponibles
Les langues disponibles
How to Use
EN
Turn On/Off
Press and hold the button
power indicator should be illuminated. Place the robot onto the base
station, the robot should turn on automatically and begin charging. To
turn off the robot, move the robot away from the base station and press
and hold the button
for 3 seconds.
Fast Mapping
After configuring the network for the first time, follow the instructions in
the app to quickly create a map. The robot will start mapping without
cleaning. When the robot returns to the base station, the mapping
process has been completed and the map will be saved automatically.
Pause/Sleep
When the robot is running, press any button to pause it.
If the robot is paused for more than 10 minutes, it automatically enters
sleep mode. All indicators on the robot will turn off. Press any button on
the robot, or use the app to wake up the robot.
Note: If the robot is paused and placed onto the base station, the current cleaning
process will end.
Auto Resume Cleaning
If the battery is too low, the robot will automatically return to the base
station to charge. After charging to the appropriate battery level, it will
resume unfinished cleaning tasks.
Note: To use this function, please enable it in the app.
24
for 3 seconds to turn on the robot. The
Do Not Disturb (DND) Mode
When the robot is set to the Do Not Disturb (DND) mode, the robot will
be prevented from resuming cleaning and the power indicator goes out.
The DND mode is disabled by default at the factory. You can use the app
to enable the DND mode or modify the DND period. The DND period is
22:00-8:00 by default.
Note:
·
The scheduled cleaning tasks will be performed as usual during the
DND period.
·
The robot will resume cleanup where it left off after the DND period
expires.
Spot Cleaning
When the robot is on standby, press briefly the button
spot cleaning mode. In this mode, the robot cleans a square-shaped
area of 1.5 × 1.5 meters around it and returns to its starting point once
the spot cleaning is completed.
Robot Restarting
If the robot stops responding or cannot be turned off, press and hold
the button
for 10 seconds to forcefully turn it off. Then, press and
hold the button
for 3 seconds to turn the robot on.
to enable the
Publicité
